Lenoxx Electronics CDR-1902 - Manual (Page 11)

IB-CDR1902(TA)-WM-E-090902
8. Setting the Alarm Time
This set has dual alarms. You may set ALARM 1 to wake you at a certain time,
or ALARM 2 to wake you at a different time, or ALARM 1+2 - both alarms will
sound at the times you set.
This feature is useful for a husband & wife waking up at different times or a single
person who likes to wake up at different times during weekdays or holidays.
To set ALARM 1, slide the ALARM SET switch to position 1,
the ALARM 1 lamp will turn on.
To set ALARM 2, slide the ALARM SET switch to position 2,
the ALARM 2 lamp will turn on.
RIGHT SIDE VIEW FRONT SIDE VIEW
ALARM SET switch
ALARM
MINUTE HOUR
1
3
2
Hold the ALARM button.
Press the HOUR button to select correct hour
time. Release the HOUR button but continue to
press the ALARM button.
Press the MINUTE button for correct minute.
Release the ALARM button, the clock display
will show the normal time of day.
4
NOTE 1: The alarm times can not be set when the ALARM SET button is switched
to OFF or ALARM 1+2 position.
NOTE 2: If you want to be waked up in the morning, the PM lamp should be off on
alarm time (when pressing ALARM button). To change PM to AM time,
advance time 12 hours.
NOTE 3: To wake to ALARM 1 time, slide ALARM SET switch to position 1.
To wake to ALARM 2 time, slide ALARM SET switch to position 2.
To wake to both times, slide ALARM SET switch to position 1+2.
10
ALARM 1
lamp
ALARM 2
lamp