Lenoxx Electronics CDR-1902 - Manual (Page 8)

IB-CDR1902(TA)-WM-E-090902
5. Playing CD in programmed order
To cancel Programmed Play
Press the STOP button to stop programmed play. Press the STOP button again after
pressing the PROGRAM button or press the CD DOOR OPEN button to open the CD
door, and the PROGRAM lamp goes off.
7
You can make a program of up to 20 tracks in the order you want them to be played.
PROGRAM
lamp
PROGRAM
button
1. Press the POWER button to turn on the power
and slide the FUNCTION switch to CD position.
Make sure the CD is stopped.
2. Press the PROGRAM button. The letters
“P01” will show and the PROGRAM lamp will
flash.
3. Press or to select the tracks you want
to program in the order you want.
4. Press the PROGRAM button to confirm. The
letters “P02” will show.
5. Repeat steps 3 and 4. You can program up to
20 tracks.
6. Press to start programmed play. The
PROGRAM lamp will show steadily on the
display.
To change the current program
Just create a new program following the programming procedure.