Lexmark MARKNET N8050 - Manual (Page 17)

Changing the wireless print server settings
13
3
Changing the wireless print server
settings
The easiest way to change settings in the wireless print server is through the embedded Web server.
For this to work, the printer must be successfully installed on the network.
1 Enter the IP address of the printer in a browser window. The embedded Web page for the
print server appears.
For information on locating the IP address of the printer, see Finding the network printer IP
address .
2 Select the settings you want to change, such as IP address.
3 Enter the changes, and then click Submit .
Finding the network printer IP address
The network printer IP address can be found by either accessing the IP Setup Utility or by printing a
network setup page.
Using the IP Setup Utility
The IP Setup Utility is installed in addition to the Lexmark Wireless Setup Utility Wizard when you run
the
MarkNet N8050 Utilities CD. You can use this utility to find the IP address of your print server.
1 Launch the IP Setup Utility. For example:
In Windows operating systems, go to Start Æ Programs Æ Lexmark Æ IP Setup Utility .
The IP Setup Utility discovers all Lexmark printers and print servers on the network. A list of
printers, including their MAC and IP addresses, appears.
2 Select the printer from the list.
3 Click Launch Web Page .
Printing a network setup page
The process for printing a network setup page can vary between different printers. For information on
printing a network setup page, see the printer documentation.
Note: If you have not successfully completed the installation of this product on the
wireless network, the IP address may not be listed on the network setup page.