LevelOne WBR-3404TX User Manual
Page 29
29
IP to your PC.
4.4.3 Wireless Setting, and 802.1X setting
Wireless settings allow you to set the wireless configuration items.
1. Network ID(SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client
stations can roam freely over this product and other Access Points that have the same Network ID.
(The factory setting is “default”)
2. Channel: The radio channel number. The permissible channels depend on the Regulatory Domain.
The factory setting is as follow: channel 6 for North America; channel 7 for European (ETSI);
channel 7 for Japan.
3. 4X : WBR-3404TX adopted TI for main chipset. With other TI 11g wireless products, the wireless
transferring rate will be doubled when the 4X mode is enable.
4. WEP Security: Select the data privacy algorithm you want. Enabling the security can protect your
data while it is transferred from one station to another. The standardized IEEE 802.11 WEP (128 or
64-bit) is used here.
5. WEP Key 1, 2, 3 & 4: When you enable the 128 or 64 bit WEP key security,
please select one WEP key to be used and input 26 or 10 hexdecimal (0, 1, 2…8, 9,
A, B…F) digits.