LevelOne WBR-3404TX - Manual (Page 49)

49
System managers of both end gateways only need set the same pre-shared key.
Function of Buttons
More: To setup detailer configuration for manual key or IKE approaches by clicking the "More"
button.
• VPN Settings - IKE
There are three parts that are necessary to setup the configuration of IKE for the dedicated tunnel: basic
setup, IKE proposal setup, and IPSec proposal setup.
Basic setup includes the setting of following items: local subnet, local netmask, remote subnet, remote
netmask, remote gateway, and pre-shared key. The tunnel name is derived from previous page of VPN
setting. IKE proposal setup includes the setting of a set of frequent-used IKE proposals and the
selecting from the set of IKE proposals. Similarly, IPSec proposal setup includes the setting of a set of
frequent-used IPSec proposals and the selecting from the set of IPSec proposals.
- Basic setup:
Local subnet
The subnet of LAN site of local VPN gateway. It can be a host, a partial subnet, and the whole subnet
of LAN site of local gateway.