Linksys Wireless-G Print Server WPSM54G - Manual (Page 16)

Appendix A
Troubleshooting
14 Wireless-G PrintServer
When you have finished upgrading the PrintServer’s
firmware, follow these instructions:
Unplug the power from the PrintServer. 1.
Disconnect the Ethernet network cable from the 2.
PrintServer and router.
Plug in the power to the PrintServer. It should
3.
automatically reconnect to the wireless network.
WEB: If your questions are not addressed here,
refer to the Linksys website, www.linksys.com