Linksys Wireless-G Print Server WPSM54G - Manual (Page 7)

Chapter 2
How to Use the PrintServer
5 Wireless-G PrintServer
Print Server Settings
This section shows you the PrintServer’s settings, which
were configured during the Setup Wizard.
If you will use the PrintServer’s web-based utility, write
down the IP address of the PrintServer. You will need it to
access the web-based utility.
Diagnostic
To run the wizard that sets up the PrintServer driver, click
the Diagnostic button. Refer to the Quick Installation for
details.
Close
To exit the Print Server Information screen, click the Close
button.
To change the PrintServer’s advanced settings, use the
web-based utility. For more information, refer to “Chapter
3: Advanced Configuration”.