La Crosse Technology Wireless 433 MHz Temperature Station WS-7136U - Manual (Page 11)

11
B. INDOOR TEMPERATURE
STATION
Note: After the batteries are installed, DO
NOT press any buttons for 15 minutes. This
may interfere with the signals, causing
temperatures to register incorrectly.
1. Remove the
battery
cover on the
backside.
To do this,
push up and
pull out.
2. Observing
the correct
polarity, install 2 AAA batteries.
3. Replace battery cover.
4. Wait 15 minutes or until both the
indoor and outdoor temperatures are
shown on the indoor temperature
station.
5. The indoor temperature station should
now show: “-:- -” in the TIME LCD,
Battery cover
Battery
Compartment