La Crosse Technology Wireless 433 MHz Temperature Station WS-7136U - Manual (Page 23)

23
TROUBLESHOOTING
NOTE: For problems not solved, please
contact La Crosse Technology via e-mail or
phone, or visit our website,
www.lacrossetechnology.com
Problem: The LCD is faint
Solution: Replace batteries
Problem: No outdoor temperature is
displayed.
Solution:
1) First try to re-establish communication
between the remote sensor and indoor
temperature station by moving both units
to within three to five feet of each other.
Wait about ten minutes and then check
for a temperature.
2) If this does not work please remove the
batteries from both units and restart the
system (please see Detailed Set-up on
page nine through eleven).
Note: Please make sure when restarting the
system that all batteries are fresh.