LSI SYM22801 - Manual (Page 47)

Starting the SCSI BIOS Configuration Utility 3-5
To change an adapter's boot order, select it and press Enter. You are
then prompted to enter the new boot sequence number. To remove an
adapter's boot order, press Enter again rather than entering a new
sequence number. While the maximum capacity is 32 adapters, only four
adapters can be assigned a boot order starting with boot sequence
number zero (0). If an invalid number is entered, an error message
appears. When the adapters are ordered as desired, press the Escape
(Esc) key to exit from this menu.
3.2.1.3 Additional Adapter Configuration
The additional adapter configuration allows the user to configure an
adapter that is not assigned a boot order. When this option is selected,
the Adapter Configuration menu appears. Here is an example of the
Adapter Configuration Menu:
Highlight the adapter to be configured and press Enter. The message
“Resetting Adapter, Please wait” appears, and then the system scans for
devices. Finally, the Utilities Menu appears and lists the available
options, which are described below.
3.2.1.4 Display Mode
The Display Mode option determines how much information about your
host adapters and SCSI devices appear on your computer monitor during
boot. For more complete information, choose the verbose setting. For a
faster boot, choose the terse setting.
3.2.1.5 Mono/Color
The Mono/Color option allows a choice between a monochrome or color
display for the SCSI BIOS Configuration Utility. You might need to
choose the mono/color setting to get a more readable screen on a
monochrome monitor.
Main Menu
BootSeq Bus DevFunc BootSeq Bus DevFunc
1 SYM53C875 00 A0 0 SYM53C875 00 98
SYM53C895