Integrated directory – Lucent Technologies DEFINITY Enterprise Communications Server User Manual

Page 30

Advertising
background image

DEFINITY® Enterprise Communications Server Release 7
Console Operations Quick Reference

555-230-890

Issue 3

June 1999

Console Operations

26

Feature Operation

To place a call on hold, perform the following:

1. While on an active call, press the

HOLD

button.

■

The On Hold lamp at the call appearance button goes on.

■

The call appearance lamp goes off.

■

The display goes blank.

■

The Position Available lamp goes on.

■

The console returns to the normal operating mode.

To return to a held call, perform the following:

1. Press the call appearance button where the call is held.

■

The On Hold lamp at the call appearance button goes off.

■

The call appearance lamp goes on.

■

The Position Available lamp goes off.

■

The person who was on hold is reconnected to the console.

■

The person’s name (if available) and extension are displayed.

2. To end the call, press the

RELEASE

button.

■

You are disconnected from the call.

■

The call appearance lamp goes off.

■

The display goes blank.

■

The Position Available lamp goes on.

■

The console returns to the normal operating mode.

NOTE:

When the On Hold lamp flashes, it indicates that the hold time has
expired. When this happens, the console also beeps to indicate that a
call needs attention. Press the call appearance button and answer the
call.

Integrated Directory

The Integrated Directory feature allows you to find user extension numbers listed
in the switch’s on-line directory. The directory contains an alphabetical listing of
names and numbers.

NOTE:

This feature is available only when the names are entered via a Property
Management System (PMS) or through switch administration.

230890_3.bk Page 26 Tuesday, April 20, 1999 12:57 PM

Advertising