Lowrance electronic AirMap 500 - Manual (Page 66)

60
9. You can execute other route commands, such as N AVIGATE
. With the
command box active, just press
→ to highlight a different command,
then press ENT .
10. If you are finished with the route for now, yo u c a n r e t u r n t o t h e
l a s t p a g e d i s p l a y e d b y p r e s s i n g
EXIT | EXIT | EXIT .
Delete a Route
1. From the
N AVIGATION P AGE
, press MENU | ENT or from the M AP P AGE
press MENU | MENU |
↓ to
R OUTE P LANNING
| ENT .
2. Press
↓ to the route list|press ↓ or ↑ to select route name|
ENT .
3. Press
← to
D
ELETE
| ENT |
← to
Y
ES
| ENT .
Save GPS Data Files to an MMC
1. Press MENU | MENU |
↓ to
S
YSTEM
S
ETUP
| ENT |
↓ to
T
RANSFER
M
Y
D ATA
| ENT .
2. The Transfer My Data menu includes a message which tells you if an
MMC is present. If no MMC is present, you must first insert a card into
AirMap in order to activate the Save command.
3. To save data from AirMap to the MMC: press ENT (for S AVE
.)
4. To accept the default name "Data" for the GPS Data File, press
↓ to
S AVE
| ENT . (If you wish to rename the file, press ENT to activate the se-
lection box. Press
↑ or ↓ to change the first character, then press → to
the next character and repeat until the name is correct. Then, press
ENT |
↓ to
S AVE
| ENT .)
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, press
EXIT | EXIT | EXIT .
Searching
In this example, we'll look for the nearest hotel or motel. For more in-
formation on different types of searches, refer to Sec. 6, Searching.
NOTE:
This example requires the Point of Interest (POI) database included
with MapCreate 6. Always use a custom map if you want to be able
to search for Points of Interest.
After AirMap has acquired a position:
1. Press
FIND |
↓ to
M AP P LACES
| ENT |
↓ to
POI-L ODGING
.
2. You could search the entire lodging category, but in this example we
will narrow our search. Press
→ to
H OTELS /M OTELS
| ENT | ENT .