Life Fitness tr 8500 User Manual

Page 8

Advertising
background image

OPERATION CHECKLIST

Make sure the HANDLEBAR and HANDRAIL BOLTS are tight.

Make sure the STRIDING BELT is properly centered or tracked.

Check the operation of the STOP KEY.

Check to insure that the POWER CORD is not located beneath

or alongside the machine.

Read the entire Operation Manual before attempting to operate the treadmill

Check to insure the WAX KIT was installed prior to operation.

ENGLISH / METRIC DEFAULT SETTING TOGGLE

The default setting of the Life Fitness 8500 Treadmill Display Console is set to English units of measurements at the
factory. If your Display Console will require units of measurements to be in Metric, it may be necessary to change the
setting from English to Metric. To do so, you will need to enter into the Diagnostic Programs and proceed to
Diagnostic State 4. To do so, follow the instructions as listed below.

Start with the Life Fitness model 8500 treadmill turned OFF at the I/O switch located adjacent to the power cord.

Press and hold the SPEED DOWN KEY

while switching the I/O switch setting to ON. All LED’s on the Display

Console will light.

Press ENTER four times to scroll through the Diagnostic Modes and enter the Software Version / Language
default settings. The display console will now show a series of numbers and letters.

For example, the Display will read 2.9EE1.

2.9

Software Version

E

English Measurement (miles)
M “ would designate Metric (kilometers)

E

English Language

1

120V

Press ENTER a fifth time and “ UNITS ” appears in the Display readout. Pressing the SPEED UP

∆ KEY

enables you to change the unit of measure from ENGLISH/ENGLISH to ENGLISH/METRIC. Pressing the SPEED
DOWN KEY

enables you to change the unit from ENGLISH/METRIC to ENGLISH/ENGLISH. Press the CLEAR

key 1 time to verify the default after you have chosen a setting.

Continue to press the CLEAR/PAUSE key to scroll backwards through the Diagnostics and return to normal operation.

Before attempting to operate your Life Fitness 8500 treadmill, it is imperative that you familiarize yourself
with the contents of the Operation Manual. If your treadmill does not respond as described in the
OPERATION MANUAL contact:

Life Fitness Customer Support Services

at (800) 351-3737 or (847) 451-0036

Prior to your call, please be sure you have located and noted the

MODEL

and

SERIAL NUMBER

of your Life Fitness 5500HR treadmill. This information is contained on
a label located in front of the Left Handrail on the frame of the
treadmill.

Copyright 1996 Life Fitness. All rights reserved. Life Fitness is a registered trademark of Life Fitness.

M051-00K45-B019

5-96

Advertising