Life Fitness Cable Motion 8289201 REV. B - Manual (Page 17)

17
STEP 8:
‰ Attach the BACK THIGH HOLD CLAMP (18) to the the FRONT UPRIGHT (1) by using two M6 x 60mm SCREWS
(51) and two 1/4” WASHERS (52) from the back of the FRONT UPRIGHT (1).
‰ Attach the THIGH HOLD DOWN (19) to the FRONT UPRIGHT (1) by using four M10 x 70mm SCREWS (41), eight
3/8” WASHERS (39), and four M10 HEX NYLOCK NUTS (53) through the FRONT SHROUD (15) and through the
FRONT UPRIGHT (1). Tighten SECURELY.
1
18
19
41
15
18
52
39
53
1
15
51