Linak TECHLINE LA36 - Manual (Page 8)

8
Misc. on the TECHLINE TM actuator system
Warranty
There is a 12 months’ warranty on the TECHLINE products against
manufacturing faults calculated from the production date of the individual
products (see label). LINAK’s warranty is only valid in so far as the equipment
has been used and maintained correctly and has not been tampered with.
Furthermore, the actuator must not be exposed to violent treatment. In the
event of this, the warranty will be ineffective/invalid. For further details,
please see LINAK A/S ordinary conditions of sale.
Maintenance
• The actuator must be cleaned at regular intervals to remove dust and
dirt and inspected for mechanical damages or wear.
• Inspect attachment points, wires, piston rod, cabinet, and plug, as well
as check that the actuator functions correctly.
• The actuator is a closed unit and requires no internal maintenance.
• To ensure that the pregreased inner tube remains lubricated the actuator
must only be washed down when the piston rod is fully retracted.
Warning!
If irregularities are observed, the actuator must be replaced.