Liebherr HC1050 - Manual (Page 18)

A delight in freshness
HC 1001 / HC 1050
13
I
NSTALLATION
2. Gently pry open the top bracket cover (Fig. 16, 1).
1
FIGURE19_01
Figure 16
3. Position the power source cable so it can
be easily connected once the appliance is
installed. Use a piece of string to fish the cable
(Fig. 7, 1) if necessary.
Installing Into a Kitchen Cabinet
Figure 14
All attachment components are provided.
CAUTION
To protect the appliance from possible
damage, allow the appliance to stand
30 minutes to 1 hour in place before
turning the electricity on. This allows
the refrigerant and system lubrication to
reach equilibrium.
1. Insert the equalizer trim (Fig. 15, 20) in the
slot so it is flush on the handle side and on
the edge of the appliance front. Secure to the
appliance with collar screws (Fig. 15, 21).
KIKB019
Figure 15