Liebherr HC1050 - Manual (Page 20)

A delight in freshness
HC 1001 / HC 1050
15
I
NSTALLATION
19 18
19
FIGURE 14_01
Figure 19
6. Secure the appliance into the kitchen cabinet.
Note
DO NOT install screw (Fig. 19, 24 / 27)
or hinge spacer (Fig. 19, 23 / 26), at top
appliance door hinge (Fig. 19, 18) if it
interferes with kitchen cabinet door hinge.
a) Place the appropriate hinge spacer
(Fig. 19, 23 / 26) between the
appliance door hinge (Fig. 19, 19) and the
kitchen cabinet wall or cabinet spacer
(Fig. 19, 32):
• For 3/4 in. (19 mm) thick cabinet walls
– use small spacer (Fig. 19, 23).
• For 5/8 in. (16 mm) thick cabinet walls
– use large spacer (Fig. 19, 26).
b) Use the appropriate screws
(Fig. 19, 24 / 27) according to the
thickness of the kitchen cabinet walls:
• For 3/4 in. (19 mm) thick cabinet walls
– use No. 5 x 75 mm screws (Fig. 19, 24).
• For 5/8 in. (16 mm) thick cabinet walls
– use No. 5 x 80 mm screws (Fig. 19, 27).
c) If you are using a cabinet spacer
(Fig. 19, 32) make sure the screws go
through the cabinet spacer.