Life Fitness 3 Tier Dumbbell Rack - Manual (Page 3)

1. LOOSELY assemble the three TIERS (1) between the LEFT and RIGHT ENDS (2 &
3) starting with the bottom tier, using twelve 3/8 X 67mm BOLTS (4), twenty-four
3/8" SAE WASHERS (5), twenty-four 3/8" RH WASHERS (6), twelve 3/8" LOW HT
LOCK NUTS (7), twelve BLACK RH CAPS (8) and twelve frame color RH CAPS (9).
NOTE: Make sure the TIERS are oriented correctly. The larger angle flange
should face upward. See DETAIL.
2. Starting with the BOTTOM TIER, SECURELY tighten all twelve bolt connections.
Snap on the twenty-four RH CAPS (8 & 9).
9
7
5
6
3
1
2
6
5
4
8
2
1
Tier Detail