Commercial mode setup for master tv (cont.) – LG 32LD333H User Manual

Page 177

Advertising
background image

13

206-4177

028 CH. OVERIDE 000

After verifying the TV Setup, set Installer

Menu item 028 CH. OVERIDE to 000.*

Commercial Mode Setup for Master TV (Cont.)

DIGITAL

WXYZ

MONO STEREO

SAP

19-3

Custom Text Label “WXYZ” created in

2-5-4 + MENU (Add Channel Label) Mode.

(Continued from previous page)

3. Run Auto Tuning (Channel Search).

a) Search for all available analog and digital channels: Go to the

Channel Menu, select the Auto Tuning option, and follow the

on-screen instructions.

b) Use the Channel Edit option in the Channel Menu to edit the

channel lineup, as necessary, to include free to guest channels

only.
• Add/delete channels per your system requirements. Note that

physical channel numbers are used to identify virtual channels.

Also, channel numbers cannot be higher than 255.

• Use the Channel Label option in the Channel Menu to add

familiar channel trademarks/logos such as ABC, CBS, NBC,

etc. to the Channel-Time on-screen display. Identi able labels

(logos) should enable the end user to readily know what com-

mon networks are available. (You can add the channel labels

in this step, or you can add channel labels or logos for channels

without icons in step 5.)

4. Transfer the TV Setup to the internal TV Controller (PTC):

2-5-5 + MENU Mode

After the TV channel lineup has been edited and channel label icons

added, enter the Installer Menu. Once in the Installer Menu, press

2-5-5

+ MENU on the Installer Remote to initiate the transfer of the

Master TV Setup to the PTC. The TV exits the Installer Menu and

then tunes through the channels in the channel lineup during the

transfer. When the transfer is complete, the TV tunes back to the

channel that was tuned before the transfer began.

Note: The maximum number of active channels that can be trans-

ferred is 141. Total channels numbering more than 141 will result in

erratic TV operation.

5. Add Custom Channel and Aux Source Labels for Analog

Channels: 2-5-4 + MENU Mode

Enter the Installer Menu, and press 2-5-4 + MENU on the Installer

Remote. Add/edit custom text labels to channel on-screen displays.

Note that digital channels often have a broadcaster generated label

(see 2-5-4 + MENU procedural information on page 22). When you

are finished, press MENU to exit 2-5-4 + MENU Mode.

CHANNEL

Enter

Move

Run Auto Tuning, edit channels, and select

familiar channel trademarks/logos using

Channel Menu options.

*

This step prevents end users from

accessing channel settings (i.e., the

Channel Menu will be inaccessible/

grayed out).

Auto Tuning

Manual Tuning
Channel Edit
Channel Label

6. Verify the TV setup.

At this point, verify that the channel lineup, channel icons, and custom labels

are correct. Make sure the TV features are set per your requirements.

7. Lock the channel lineup.

Enter the Installer Menu. Set item 028 CH. OVERIDE to 000 and press ENTER

to lock the channel lineup and restrict access to the TV setup menus. Press

ENTER

again to save your changes and exit the Installer Menu.*

The Master TV Setup is now ready to be copied to a USB memory device or a clone

programmer (see cloning information in this document).

Advertising
This manual is related to the following products: