LG 32LD333H - Manual (Page 296)

29 206-4185
LOCK
PICTURE AUDIO
INPUT OPTION
TIME
MY MEDIA
CHANNEL
TV Setup Menus
Shows that the TV is in
Pass-through Mode .
Function Menu
Indicates the TV CPU is in FTG
Mode . While the TV is in FTG
Mode, Installer Menu settings
can be accessed as read-only
using an Installer Remote. To
make changes, use the FTG
Configuration Application.
FTG Mode of Operation
ABC
ASPECT RATIO
Enter Move
Set By Program
4:3
16:9
Zoom
Just Scan
Determining the TV Operating Mode
To determine the operating mode of the
TV, press MENU on the Installer Remote. The
menu display alternates based on the operating
mode. See examples at right.
If the end user Function Menu appears, the TV
is in FTG Mode. If the TV setup menus
appear, the TV is in Pass-through Mode.
FTG Mode Overview
FTG Mode enables Pro:Idiom decryption and also allows logical channel mapping of physical channels.
This section describes how to configure the TV’s CPU for FTG Mode operation.
Use one of the following processes to configure the CPU with FTG Channel Map and FTG Installer Menu
settings:
• Configure an individual LD330H/LD333H TV via its USB port using an FMA Configuration (.fma) file on a
USB memory device. The “Teach to TV (FMA)” process, along with associated procedures, is described
on pages 30 to 33.
• Configure all LD330H/LD333H TVs at the site using a Pro:Centric server head end device (Example:
PCS150R). Load an FMA Configuration (.fma) file on the Pro:Centric server using the TV E-Z Installation
“Configuration” option in the Pro:Centric Server Admin Client. Refer to the Pro:Centric™ Server Admin
Client User Guide for further information.
While the TV is in FTG Mode:
• Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu items
will be read-only.
• Any FTG configuration changes must be made in the FTG Configuration Application. FTG Channel Map
Configuration and FTG Installer Menu Configuration Utilities enable you to make changes, respectively, to
the FTG Channel Map and FTG Installer Menu settings as necessary.
• If it becomes necessary to reset the TV to Pass-through Mode, there are several options that will enable
you to do so. Refer to Reference section, “Resetting a TV to Pass-through Mode,” for further information.
Pages 34 to 37 provide overviews of the FTG Channel Map, FTG Installer Menu, and FMA Configuration
Utilities that comprise the FTG Configuration Application. Refer to the Free-To-Guest (FTG
Configuration Application manual for further information on the FTG Configuration Application.
Note: The LD330H/LD333H cannot be configured for FTG Mode if an external MPI device has
been implemented as a means of controlling the TV.