Lenoxx Electronics pmnHT-4OO - Manual (Page 20)

IB-HT400-WM-E-122502
AM / FM TUNER CONNECTIONS
1. Insert the audio cables into the AUX OUTPUT L (left=white) and R (right=red) jacks on the back of your AM/FM
TUNER, and into the corresponding TUNER INPUT AUDIO jacks on the back of your HOME THEATER. This will
enable you to hear your stereo AM/FM TUNER through your HOME THEATER SYSTEM.
NOTE: Your AM/FM TUNER’s sound will come out of the 2 front speakers plus the subwoofer since the default
setting for the sound output is the same as the audio source from the AM/FM TUNER
(2 channel, STEREO). For “Dolby Pro Logic” (5.1 channel) sound reproduction, press the SURROUND
button. The sound will come out of all 5 speakers plus the subwoofer.
2. Press the POWER button on the main unit (not the REMOTE) to turn on the main power of the set. Next press the
POWER button on the REMOTE to turn the set on (or off).
3. Press the SOURCE button several times till the TUNER indicator lights.
4. Make sure your AM/FM TUNER is on and follow your AM/FM TUNER’s instructions.
5. Go to Page 20 for detailed instructions.
19
BACK OF HT-400
HOME THEATER
YOUR AM / FM TUNER
CONNECT ALL SPEAKERS AS SHOWN ON PAGE 8
(OR THE QUICK SETUP DIAGRAM SHEET).