Lava Computer IEEE 1394 - Manual (Page 3)

Installation and Removal
To make sure you have installed successfully, check the
‘System Properties’ dialog box:
To check ‘System Properties’ go to ‘My Computer,’ ‘Control Panel,’
‘System Properties,’ ‘Device Manager,’ ‘1394 Bus Controller.’ It should
show: ‘Texas Instruments OHCI Compliant IEEE 1394 Host Controller.’
Insert the Lava IEEE 1394 Interface Adapter into the PC Cardbus slot of a
computer. Note: Lava recommends turning off the computer when
inserting or removing the card. Not doing so may hang the computer
with some operating systems and some slots.
Note: In some cases, some versions of Windows® may require the
Windows Installation CD to supply drivers for the card.
3