Lindy 42985 - Manual (Page 16)

10. To complete the printer installation click Finish.
PC to PC data link
Using the docking station’s Transfer port and the supplied PC Linq software you can connect
two PCs together for data transfer.
To set up the PC data link function (PC Linq), you need two PC’s, each with a USB port, and an
additional USB Type A to B cable (sold separately). One PC is connected to the docking
station’s Upstream (Local) port; the other to the Docking Station’s Transfer (Remote) port.
Remote PC
(Transfer Port)
Local PC
(Upstream Port)
1. Firstly, ensure the PC Linq software is installed on both connected PC’s. The software
can be found on the supplied driver CD in the folder called USB Bridge Cable.
2. Connect the local and remote computers according to the instructions and diagram
above.
3. Launch the PC Linq application on both computers by clicking the
icon on each Windows desktop –