Life Fitness 8225 - Manual (Page 11)

• Route threaded end of the TRICEP CABLE (12) around pulleys in TOP BOOM (2) and PULLEY
BLOCK ASSEMBLY. Route TRICEP CABLE (12) down through hole in TOWER BRACE (7) as shown
in FIGURE 13.
STEP 13:
FIGURE 13
• SECURELY assemble one 4-1/2” PULLEY (13) between the plates of the TOP BOOM (2) using one
3/8 X 2-1/4” BOLT (21) and one 3/8” LOCK NUT (27) as shown in FIGURE 14. (NOTE: Make
sure the cable runs in the groove of the PULLEY.)
STEP 14 :
FIGURE 14
11
PULLEY
BLOCK
ASSEMBLY
12
3/8 X 2-1/4” 21
13
12
27
2
2
7