Troubleshooting, An indicator light is not on, Troubleshooting” o – Lexmark N5 User Manual

Page 29

Advertising
background image

24

Troubleshooting

Troubleshooting

An indicator light is not on

Note:

See page 5 to locate the indicator lights.

For this problem:

See page:

An indicator light is not on

24

The Lexmark Printer Adapter Installation Software
screen does not appear

25

I cannot find the network settings of my computer’s
wireless adapter

25

My MAC address is not listed on the Select your N5
Wireless Adapter screen

26

My network is not listed on the Connect to the network
(automatic) screen

26

I do not know the hexadecimal format of my WEP key 27

Setup was not successful (My printer was not found
on the network)

27

The Lexmark printer software installation screen does
not appear

28

An error message appears

28

My network printer does not appear in the list of
available printers

28

There is not a Network button on the Results: No
Printer Attached screen

29

There is not an Install Selected Printer button on the
Network Configuration screen

29

My network printer does not print

30

If this indicator
light is not on:

Make sure the:

Power

Printer adapter power supply is connected
properly.

USB

USB cable connecting the printer adapter to
the printer is secure, and the printer is on.
Note: This light blinks to indicate that an IP
address is being assigned by way of DHCP
or that a print job is processing.

Network link

Access point is powered on.
Access point is configured for your printer

adapter.

Printer adapter is within the appropriate

range for your access point.

Network is operating properly. For

additional help, refer to your network
documentation or contact your network
administrator.

Note: This light blinks to indicate any
wireless network activity detected by the
printer adapter.

Advertising