The install program, Using the install program – LevelOne 10/100M 32bit Fast Ethernet PC card User Manual

Page 34

Advertising
background image

LevelOne Fast Ethernet PC Card user’s manual

32

CardBus controller on your system. However, you must select
hardware resource settings that are not being used by other
devices; otherwise, your PC system may have device conflicts.

5. Insert the LevelOne 10/100Mbps 32bit Fast Ethernet PC Card

into the CardBus socket. Then attach the network cable to the
card.

6. Restart your computer and connect to your network. If you

cannot connect to the network, refer to Appendix A

The Install program

Before you can use your LevelOne 10/100Mbps 32bit Fast
Ethernet PC Card, you need to install and modify some files in your
computer system. You can make these changes manually, or you
can let the INSTALL.EXE program make them for you.

This section explains how you can use the INSTALL.EXE
program to install the enablers and the files needed by the network
operating system.

Using the Install program

To run the INSTALL.EXE program, follow these instructions:

At the DOS prompt type INSTALL and press [Enter]. You see an
opening screen, which welcomes you to the program and asks if
you wish to continue.

Advertising