LevelOne 10/100M 32bit Fast Ethernet PC card - Manual (Page 38)

LevelOne Fast Ethernet PC Card user’s manual
36
CONFIG.SYS file will also be modified to include the Enabler
Driver. You should see the following message if the installation has
been successful:
Custom configuration
To perform a custom installation, you need to select the Custom
Configuration Menu after you begin the INSTALL program.
After selecting the Custom Installation Menu, you see a series of
submenus prompting you to select an IRQ and I/O address.
Interrupt select
The first submenu is the Interrupt submenu. Move the cursor to the
interrupt of your choice and select it by pressing <Enter>.
Interrupts available for your LevelOne 10/100Mbps 32bit Fast
Ethernet PC Card include 9, 10, 11, 12 and 15.