Lenoxx Electronics CD-50 - Manual (Page 14)

QUICK INSTRUCTIONS
BASIC FEATURES
PAUSE
Pressing PLAY/PAUSE button while a disc is playing will pause play (the playing time of
the current track will flash). Press PLAY/PAUSE again to continue play.
STOP or POWER OFF
Press the STOP button once to stop play, and the set will turn itself off automatically
after 30 seconds.
REPEAT
During play, press the REPEAT button once, “REPEAT 1” will show. That song currently
playing will play and repeat again and again till you press STOP.
To repeat all songs, press the REPEAT button twice. “REPEAT ALL” will show. All songs
will play and then repeat. Press the REPEAT button again to return to normal play.
NOTE: During play, the PROGRAM button functions the same as the REPEAT button.
SKIP ( or )
During play, press and hold the SKIP buttons or while the disc is playing to
search backward or forward through a particular track (or song).
Press several times to skip to a later or earlier song, or to get back to the beginning of
the song.
PROGRAMMING
To arrange the songs to play in a special sequence (1, 5, 2, 3, etc.) you can program
the set to your taste.
During stop mode, press the PROGRAM button, then press either SKIP button (
or ) to select the track you want. Repeat pressing PROGRAM button and SKIP
button ( or ) till you finish programming, then press PLAY. The set will play the
songs in the order that you programmed.
2
PLAYING A DISC
You can play compact discs that have this logo:
1. Slide the OPEN button to open the CD DOOR.
2. Place a disc on the center post with the label facing up,
and then gently push down on the center of the disc
until it clicks in.
3. Close the CD DOOR, press the PLAY button, the set
starts playing.
FOR OTHER FEATURES INCLUDING DETAILED
PROGRAMMING INSTRUCTIONS, PLEASE READ THE
OPERATING INSTRUCTIONS BOOKLET.