Lenoxx Electronics CD-50 - Manual (Page 7)

PROGRAMMED PLAY
• The tracks (songs) on the disc can be programmed (arranged in advance) to play in
any order you prefer (up to 21 tracks can be programmed).
Programming Example:
Program Number 1 2 3 4 5 6 7 8
Track Number (song number) 3 5 8 1 2 4 1 1
etc.
etc.
PROGRAMMING YOUR PLAYING SEQUENCE
•
During programming, the word PGM (program) flashes in the display. To program
songs to play in your preferred order, follow steps below:
1.Press the PROGRAM button once in
stop mode.
The word PGM will show in the DISPLAY.
X
1
PG M
Program number
2.Press the SKIP button ( or ) to
select track number 3 (example). PGM
will flash in the displa y.
PG M
Track number
3.Press the PROGRAM button. Track 3 is
now programmed.
Program # 2 will now show in the
display, ready for your next selection of
track.
X
1
PG M
4.Repeat steps 2 and 3 to program other
tracks till you finish (up to 21 selections).
5.After programming is finished, press
PLAY to begin programmed play.
shows in the display together with PGM,
and music begins.
NOTE:
- The player will stop automatically after
all programmed tracks have been
played.
- To quit programmed play, press STOP
button once. Then you may press PLAY
button to re-start normal play.
Your programming will be lost:
•
When the alkaline batteries are
exhausted or removed, or the optional
AC ADAPTOR is disconnected.
• When the power is shut off.
6
SKIP
PRO G RA M PRO G RA M
• During CD play, the PROGRAM button functions the same as the REPEAT button.
The set must be in stop mode to program it.