Hardware and software requirements, Hardware, Software – Lenovo 40Y8699 User Manual
Page 18: Requirements, Preparing, Super, Multi-burner, Drive
This
software
enables
you
to
play
back
DVD
videos
on
your
computer
or
to
play
video
files
from
your
hard
disk
drive.
Note:
Some
graphics
adapters
such
as
the
FIREGL,
Intergraph,
and
3dLabs,
do
not
support
DVD
video
playback.
Hardware
and
software
requirements
You
must
have
the
following
hardware
installed
on
your
host
computer
in
order
to
use
this
option:
v
One
or
two
available
USB
2.0
ports
Your
computer
must
have
one
of
the
following
operating
systems
installed
to
use
this
option:
v
Microsoft
®
Windows
®
XP
v
Microsoft
Windows
2000
Professional
(Service
Pack
4
or
later)
Note:
The
drive
will
not
operate
correctly
unless
Service
Pack
4
or
later
is
installed.
Preparing
to
use
the
USB
2.0
Super
Multi-Burner
Drive
Before
using
the
USB
2.0
Super
Multi-Burner
Drive,
follow
the
procedure
below:
1.
Make
sure
the
USB
2.0
Super
Multi-Burner
Drive
is
properly
connected
to
your
host
computer.
2.
Check
the
locations
of
the
functions
on
the
USB
2.0
Super
Multi-Burner
Drive
(refer
to
the
figures
below).
3.
Insert
the
USB
2.0
Super
Multi-Burner
Drive
Software
and
User’s
Guide
Super
CD
that
was
shipped
with
this
option
to
install
the
CD-R/CD-RW/DVD
writing
software.
4.
Double-click
on
the
application
you
want
and
follow
the
instructions
on
the
screen.
5.
Check
that
the
drive
operates
normally
and
keep
the
enclosed
warranty
in
a
safe
place
after
filling
it
in.
Following
are
the
locations
of
the
functions
on
the
host
USB
2.0
Super
Multi-Burner
Drive:
1
Disc
tray
Firmly
seat
the
media
with
the
label
face
up
on
the
disc
tray.
Attention:
Push
the
CD/DVD
media
down
until
it
clicks
and
is
secure
in
the
center.
2 USB
connectors
Insert
the
plug
of
the
provided
dedicated
USB
cable.
3
DC
IN
connector
Connect
the
provided
AC
adapter
into
the
DC
IN
connector.
1-4
USB
2.0
Super
Multi-Burner
Drive
User’s
Guide