LG C2500 - Manual (Page 21)

20 C2500
Getting Started
• Alert type: to define how the phone notifies you when
receiving an incoming call. The options are: Ring,
Vibrate, Ring & Vib., Ring after Vib., Silent and Beep
once.
– When alert type is set to Vibrate or Silent, no ringing tone
will be heard and , is displayed when the phone is
in the Idle mode.
• Answer mode: To set the phone answer an incoming
voice call by press Send key or Any key or Auto
(headset mode only).
• Extra tone: to set the Warning, Error, Camp on, Connect
On or Off. For example, when set to on, the phone
sounds a warning tone when the battery is running out
of power.
• Light: user can define the timer of the LCD backlight,
turn on/off the keypad backlight or select the color
pattern of the Status LED.
Tips for Call Options
• A call can be connected to any single caller by pressing
Option key. When user press Option key during active
call, user can choose one of those functions from the
list:
– Hold: hold a call on.
– Retrieve: reconnect a holding call.
– Retrieve all: reconnect all holding call.
– Swap: switch between the call on hold and active.
– Conference: make a multi-party conversation.
– Transfer: transfer a call.
– Spilt: to suspend the multi-party call.
– End single: end one of conference call.
– End all: end a multi-party call.
– End: End a call.
– Mute/Unmute: mute the call during the conversation.
– New call: make a new call during an active call.
– Contacts: shortcut to contacts menu.
– Text message: shortcut to Message menu.
– Voice recorder: start recorder conversation.
– DTMF: set On / Off for DTMF (Dual Tone Multi-Frequency)
tone dialing system.
• Adjust volume during a call
During an activate call, press left side key to adjust volume.
If the Loudspeaker is activated, use left side key adjust
volume also.