LG C2500 - Manual (Page 22)

C2500 21
• Loudspeaker
Loudspeaker mode let handset act as loudspeaker during a
call. Do not hold the handset to your ear if loudspeaker
mode on. To activate
/deactivate the loudspeaker
during a call, press > H-free/H-held, the single will show
on the screen. The loudspeaker is automatically
deactivated when you end the call or call attempt or
connect the headset to the phone. The loudspeaker is
default setting for playing MP3, voice recorder.
! Note
Using FM radio, user should plug in headphone; FM radio does not
support loudspeaker function.
• Hold a call
Pressing
<and selecting Hold allows you to put an active
call on hold. This feature can be used when an incoming
call is received during an active call or if you want to make
another without disconnecting the active call.
• Make a new call during a call
You can dial a number during a call without disconnecting
the active call.
– Press < and select Hold to put an active call on hold
then press Option select New call. Make a new call by
keying new number.
– Press Option and select Swap, new number will go on
hold, old number will be active and vice versa.
– You can also select record from contacts, after select
New call, press Back to option list and choose Contacts.
• Multiparty call
– You can connect to several people together or
individually at a time.
– Make a call to the first participant.
– Call the second participant as explained in Make a new
call during a call.
– Press < and select Conference. This joins the calls to
the conference.
– Repeat step 2 and 3 to allow new participants to be
connected to the Conference.
– Press Option and select End all to end the call. Or press
E.
– Any call (participant) can be disconnected by press
Option key and select End single.