Linn CLASSIK Movie Di - Manual (Page 13)

7
Connecting the CLASSIK Movie System Di
Connecting the CLASSIK Movie Di to other components
For the best performance, the video outputs from auxiliary sources should be connected
directly to your TV and the audio outputs to your CLASSIK Movie Di – see diagram below.
Full details on connecting the CLASSIK Movie Di are contained in this chapter.
Connecting to a mains supply
Connect the CLASSIK Movie Di to a
mains supply using the mains lead
provided.
IMPORTANT:
Do not turn on the mains supply until you have connected all other components.
CLASSIK MOVIE SYSTEM
TITLE/BAND
IR SENSOR
SET-TOP BOX
VCR
CLASSIK MOVIE SYSTEM
TV
SPEAKERS
TO S VIDEO INPUT OF TV
MONITOR
OUT
TO SCART SOCKET OF TV
C
onnec
ting
Connecting the CLASSIK Movie Di
Full details on connecting the CLASSIK Movie Di are contained in this section.
NOTE:
In this manual ‘TV’refers to projection TVs and monitors as well as televisions.
Connecting to a mains supply
IMPORTANT:
Do not turn on the mains supply until you have connected all other components.
Connect the CLASSIK Movie Di to a mains supply using the mains lead provided.
When any connections are made to speakers or a TV, the CLASSIK Movie Di must be
configured before they will operate correctly. This is fully explained in the Setup Menus
chapter.
Once all relevant connections have been made, turn on the mains supply. The
symbol appears on the front panel display. This symbol means the unit is in standby
mode.
Connecting the CLASSIK Movie Di to other components
For the best performance, the video outputs from auxiliary sources should be connected
directly to your TV, and the audio outputs to your CLASSIK Movie Di – see diagram
below.
If you prefer, or if your TV does not have sufficient connections, you can connect the
audio and video outputs to the CLASSIK Movie Di. If you have the European version of
the CLASSIK Movie Di you can do this by daisy-chaining your auxiliary components and
having one connection to the unit – see diagram below.
If you have the US version, you can connect the audio and video outputs from your
auxiliary sources individually to the CLASSIK Movie Di – see diagram below.
CLASSIK MOVIE SYSTEM
TITLE/BAND
IR SENSOR
GAMES CONSOLE
SET TOP BOX
VCR
CLASSIK MOVIE Di
video signals
audio signals
video signal
TV
SPEAKERS
audio signals
CLASSIK MOVIE SYSTEM
TITLE/BAND
IR SENSOR