Linn CLASSIK Movie Di - Manual (Page 15)

9
Connecting
to a TV
(European
version)
If your TV is fitted with an S-video input socket, connect as shown.
If your TV does not have an S-video input socket, connect the CLASSIK Movie System
Di to the TV’s SCART socket.
TO CENTRE
SPEAKER
TO RIGHT
SURROUND
SPEAKER
TO LEFT
SURROUND
SPEAKER
TO RIGHT
FRONT
SPEAKER
TO LEFT FRONT
SPEAKER
TO CENTRE
SPEAKER
TO RIGHT
SURROUND
SPEAKER
TO LEFT
SURROUND
SPEAKER
TO RIGHT
FRONT
SPEAKER
TO LEFT FRONT
SPEAKER
TO ACTIVE SUBWOOFER
-
+
LEFT AUDIO OUTPUT
TO TAPE RECORDER
LEFT AUDIO OUTPUT
FROM TAPE RECORDER
RIGHT AUDIO OUTPUT
TO TAPE RECORDER
RIGHT AUDIO OUTPUT
FROM TAPE RECORDER
TO POWER AMP INPUTS
TO POWER AMP INPUTS
TO POWER AMP
OR ACTIVE SUBWOOFER
C
onnec
ting
Connecting to a set-top box or HDTV decoder (US version only)
If your set-top box, HDTV decoder or other auxiliary device is fitted with YPrPb/YUV
output sockets, connect as shown.
Connecting to a VCR (European version)
Connecting the CLASSIK Movie Di to your VCR depends on the connections available on
the VCR. See your VCR’s instruction booklet for guidance.
NOTE:
Do not have two different sources connected to the S VIDEO IN and VCR SCART sockets
at the same time.
FROM S VIDEO OUTPUT ON VCR
FROM VCR SCART SOCKET
OR
IN
Pr Pr
Y Y
Pb Pb
OUT
CVBS OUT CVBS IN
R IN TV L IN TV
R IN VCR L IN VCR
FROM VIDEO
OUTPUT ON VCR
FROM AUDIO
OUTPUTS ON VCR
Connecting to a VCR (US version)
Connecting the CLASSIK Movie Di to your VCR depends on the connections available on
the VCR. See your VCR’s instruction booklet for guidance.
Connecting to an external power amplifier
If you are using an external power amplifier to feed audio signals to your speakers,
follow the diagram below.
TO POWER AMP INPUTS
TO POWER AMP INPUTS
TO POWER AMP
OR ACTIVE SUBWOOFER
IN
Pr Pr
Y Y
Pb Pb
CVBS OUT CVBS IN
R IN TV L IN TV
R IN VCR L IN VCR
OUT
FROM VIDEO
OUTPUTS ON
AUXILIARY
DEVICE
FROM AUDIO
OUTPUTS ON
AUXILIARY
DEVICE
English
9