LevelOne GSW-2474T - Manual (Page 16)

10
IDENTIFYING EXTERNAL COMPONENTS
This chapter describes the front panel, rear panel, and LED indicators
of LevelOne GSW-1674T/2474T.
Front Panel
The figure below shows the front panels of the Switch.
Figure 3. Front panel of GSW-1674T 16-port Gigabit Ethernet Switch
Figure 4. Front panel of GSW-2474T 24-port Gigabit Ethernet Switch
LED Indicator:
Comprehensive LED indicators display the status of GSW-
1674T/2474T and the network (see the LED Indicators chapter below).
Gigabit Ethernet Ports (Port 1~16/24):
The Switch 16/24 Gigabit twisted pair ports, supported auto negotiable
10/100/1000Mbps and auto MDI/MDIX crossover detection function, this
function gives true “plug and play” capability, just need to plug-in the
network cable to the hub directly and don’t care if the end node is NIC
(Network Interface Card) or switch and hub.
These ports can operate in
half-duplex mode for 10/100Mbps and full- duplex mode for
10/100/1000Mbps.
Note: When the port was set to “Forced Mode”, the Auto
MDI/MDIX will be disabled.