LevelOne GSW-2474T User Manual

Page 17

Advertising
background image

11

Rear Panel

Figure 5. Rear panel of the Switch

Power Switch:

This is a switch where you can control to enable or disable the power.

AC Power Connector:

This is a three-pronged connector that supports the power cord. Plug
in the female connector of the provided power cord into this connector,
and the male into a power outlet. Supported input voltages range from
100-240V AC at 50-60Hz.

Reset:

The Reset button is to reset all the setting back to the factory default.

Note: Be sure that you recorded the setting of your device, else all the

setting will be erased when pressing the “Reset” button.

Advertising
This manual is related to the following products: