Life Fitness FIT 1.0 CM - Manual (Page 16)

STEP 9:
‰ Pre-assemble two FLANGE BEARINGS (23) and SHAFT (32) into ADJUSTMENT HUB as illustrated
‰ Attach ROLLER PAD ASSEMBLY (3) to center hole ADJUSTMENT HUB using two 3/8 WASHERS (28)
and two 3/8 X 3/4 BOLTS (31) and tighten SECURELY.
16
FIGURE 9
PIN MUST BE
LOCATED ON
TOP SIDE
3/8 x 3/4