Logic 3 RM-DN2 User Manual

Mv-flash m3, User guide, Introduction

Advertising
background image

MV-Flash M3+

User Guide

V2.1

This brief guide explains how to use and set up your MV-FLASH M3+ decoder board. It is
intended for Digital View/RemoteMedia staff who assemble ViewStream product for demos or for
customers, and for resellers of RemoteMedia equipment.

1

Introduction

The MV-FLASH M3+ is an MPEG decoder board designed to use with TV and Video
Monitors for playing MPEG-1/MPEG-2/MPEG-4 video and audio files.

MPEG-1, MPEG-2, MPEG-4* video

MPEG still picture output

JPEG picture

MP3 audio file

Video signals of PAL & NTSC standard

Composite and S-Video signal output

VGA output

Stereo audio output

RS-232 port (option)

* DivX MPEG-4 format

HOW TO PROCEED

Ensure you have all parts & that they are correct. Refer to:

General notes

System setup

Operating Instructions

IMPORTANT USAGE NOTE

This equipment is for use by developers and integrators; the manufacturer accepts no
liability for damage or injury caused by the use of this product. It is the responsibility of the
developer, integrators or other users of this product to:

Ensure that all necessary and appropriate safety measures are taken.

Obtain suitable regulatory approvals as may be required.

Check power settings to all component parts before connection.

DISCLAIMER
There is no implied or expressed warranty regarding this material.

- 1 -

Advertising