La Crosse Technology Radio Controlled Temperature Alarm WS-8054U - Manual (Page 4)

3) Press and release the "SET" button to confirm the
time zone setting, and to advance to DST (Daylight
saving time) setting.
III) DST (DAYLIGHT SAVING TIME) SETTING
Note: The DST default is "On", meaning that the WWVB
will automatically change the time according to Daylight
Saving Time in the spring and fall. For areas that do not
recognize DST changes (Arizona and parts of Indiana)
turn the DST "OFF".
1) Hold down the "SET" button for 2 seconds (the
selected time zone will flash); press and release the
"SET" button once more until "On" flashes in the time
LCD and "DST" flashes where the weekday
normally appears.
2) Press and release the "+" button to turn the DST off,
this will be indicated by the display of "OFF" in the
time LCD.
3) Press and release the "SET" button to confirm the
DST setting and to advance to select the language
for the weekday.
IV) LANGUAGE SELECTION FOR THE WEEKDAY
1) Hold down the "SET" button for 2 seconds (the
selected time zone will flash), press and release the
"SET" button 2 more times until the default language
"US" flashes in the time LCD.
2) Press and release the "+" button to toggle through
and to select the desired language. There are 3
languages to select from:
Press and release the "SET" button to confirm the
language setting, and to advance to manually set the
time.
V) TIME SETTING
Note: When the WWVB signal is found, that time will
over-ride the manually set time.
1) Hold down the "SET" button for 2 seconds (the
selected time zone will flash), press and release the
"SET" button 3 more times until the hour "12" flashes
in the time LCD.
2) Press and release the "+" button to select the hour.
Note: when setting the hour, "PM" will appear to the
left of the hour display, if it is AM nothing will be
displayed.
3) Press and release the "SET" button to confirm the
hour setting, and to shift to select the minutes.
4) Press and release the "+" button to select the minutes.
5) Press and release the "SET" button to confirm the
time setting, and to advance to manually set the
calendar.
VI) CALENDAR SETTING
Note: When the WWVB signal is found, that date will
over-ride the manually set date.
1) Hold down the "SET" button for 2 seconds (the
selected time zone will flash), press and release the
"SET" button 5 more times until the default year "00"
flashes in the date LCD.
2) Press and release the "+" button to select the year.
3) Press and release the "SET" button to confirm the
year and to move to select the month.
4) The default month "1" will flash. Press and release
the "+" button to select the appropriate month.
5) Press and release the "SET" button to confirm the
month and to move to select the date.
6) The default date "1" will flash. Press and release the
"+" button to select the appropriate date.
7) Press and release the "SET" button to confirm the
date and to move to select the weekday.
8) The default weekday "MON" (depends on selected
language) will flash. Press and release the "+" button
to select the appropriate weekday.
9) Press and release the "SET" button to confirm the
calendar settings and to advance to select either 12
or 24-hour time display.
VII) 12/24-HOUR SETTING
1) Hold down the "SET" button for 2 seconds (the
selected time zone will flash), press and release the
"SET" button 9 more times until the "12" hour time
display flashes in the time LCD.
US English
F French
E Spanish
GB P.17 GB P.16
GB P.19 GB P.18
GB P.21 GB
P.20