LevelOne WBR-6005 - Manual (Page 85)

The following items are displayed on this page:
WPS Summary — Provides detailed WPS statistical information.
◆ WPS Current Status — Displays if there is currently any WPS traffic
connecting to the Wireless Router. (Options: Start WSC Process; Idle)
◆ WPS Configured — States if WPS for wireless clients has been
configured for this device.
◆ WPS SSID — The service set identifier for the unit.
◆ WPS Auth Mode — The method of authentication used.
◆ WPS Encryp Type — The encryption type used for the unit.
◆ WPS Default Key Index — Displays the WEP default key (1~4).
◆ WPS Key (ASCII) — Displays the WPS security key (ASCII) which can
be used to ensure the security of the wireless network.
◆ AP PIN — Displays the PIN Code for the Wireless Router. The default is
exclusive for each unit. (Default: 64824901)
◆ Reset WPS to Default — Resets the WPS settings to factory default
values.
WPS Config — Configures WPS settings for the Wireless Router.
◆ WPS Mode — Selects between methods of broadcasting the WPS
beacon to network clients wanting to join the network:
PIN: The Wireless Router, along with other WPS devices, such as
notebook PCs, cameras, or phones, all come with their own eight-
digit PIN code. When one device, the WPS enrollee, sends a PIN
code to the Wireless Router, it becomes the WPS registrar. After
configuring PIN-Code information you must press ―Apply‖ to send
the beacon, after which you have up to two minutes to activate WPS
on devices that need to join the network.
■
PBC: This has the same effect as pressing the physical WPS button
that is located on the front of the Wireless Router. After checking
this option and clicking ―Apply‖ you have up to two minutes to
activate WPS on devices that need to join the network.
■
– 85 –
C HAPTER 7 | Wireless Configuration
Wi-Fi Protected Setup (WPS)