LevelOne WBR-6005 User Manual
Page 89
◆
Destination IP Address — Specifies the destination IP address to
block or allow traffic from.
◆
Source IP Address — Specifies the source IP address to block or allow
traffic from.
◆
Protocol — Specifies the destination port type, TCP, UDP or ICMP.
(Default: None).
◆
Destination Port Range — Specifies the range of destination port to
block traffic from the specified LAN IP address from reaching.
◆
Source Port Range — Specifies the range of source port to block
traffic from the specified LAN IP address from reaching.
◆
Action — Specifies if traffic should be accepted or dropped. (Default:
Accept)
◆
Comment — Enter a useful comment to help identify the filtering rules.
C
URRENT
F
ILTER
R
ULES
The Current Filter Table displays the configured IP addresses and ports that
are permitted or denied access to and from the Wireless Router.
◆
Select — Selects a table entry.
◆
MAC Address — Displays a MAC address to filter.
◆
Destination IP Address — Displays the destination IP address.
◆
Source IP Address — Displays the source IP address.
◆
Protocol — Displays the destination port type.
◆
Destination Port Range — Displays the destination port range.
◆
Source Port Range — Displays the source port range.
◆
Action — Displays if the specified traffic is accepted or dropped.
◆
Comment — Displays a useful comment to identify the routing rules.
– 89 –
C
HAPTER
8
| Firewall Configuration
MAC/IP/Port Filtering