Lexmark 30E - Manual (Page 15)

Use To
8 2-Sided/Eco-Mode Activate 2-Sided to:
• Print on both sides of the paper (duplex).
Activate Eco-Mode to:
• Print on both sides of the paper (duplex).
• Change to Power Saver mode after the printer is left
idle for 10 minutes.
• Set screen brightness to low.
9 Cancel • Cancel a print, copy, or scan job in progress.
• Exit from a menu level of the Copy, Scan, Photo, or File
Print menu to the top level of a menu.
• Exit from a menu level of the Setup menu to the top
level of the previous mode.
• Clear current settings or error messages, and return to
default settings.
10 Arrow buttons • Choose a menu or submenu item that appears on the
display.
11 Select • Select menu options.
• Save settings.
• Feed or eject paper. Press and hold for 3 seconds to
feed or eject paper from the printer.
12 Display
Note: The display is turned off in Power Saver mode.
View:
• Printer status
• Messages
• Menus
13 Setup Access the setup menu and change printer settings.
Note: The Copy, Scan, and Photo button lights are off when
this button is selected.
Using the printer control panel buttons and menus
15