Scanning to a flash drive or memory card, Scanning photos into an editing application, Using the printer control panel – Lexmark 30E User Manual

Page 59

Advertising
background image

Notes:

If the printer is connected only to a local computer, then the printer will automatically download a list of the
scan applications.

You may be prompted to enter a PIN if the computer requires it. Press the arrow buttons to enter the PIN.
Press

each time you enter a number.

To assign a computer name and a PIN to the computer, see the Help for the printer software associated with
your operating system.

4

Wait until the printer has finished downloading a list of the scan applications available on the selected computer.

5

Press the left or right arrow button to select an application, and then press

.

6

Press the arrow buttons to select the resolution quality and the original image size. Press

each time you make

a selection.

7

Press

to start scanning.

The scan is complete when the application you selected in step 5 opens on the destination computer, and the scan
appears within the application as a new file.

Scanning to a flash drive or memory card

Before you begin, make sure your flash drive or memory card is not write protected.

1

Load an original document faceup into the ADF or facedown on the scanner glass.

2

From the printer control panel, press .

3

Press the up or down arrow button to scroll to Memory Device.

4

Insert the flash drive or memory card, and then press

.

5

Press the arrow buttons to select the resolution quality, the output file type you want to create, and the original
image size. Press

each time you make a selection.

Note: Select the PDF file type if you want to scan multiple pages and save them as one file.

6

Press

to start scanning.

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.

Scanning photos into an editing application

Using the printer control panel

1

Load the photo or photos facedown on the scanner glass.

2

From the printer control panel, press .

3

Press the left or right arrow button to scroll to USB or the name of the network computer to receive the scan, and
then press

.

The local or network computer is the destination that will receive the scan.

Scanning

59

Advertising
This manual is related to the following products: