Lexmark N1 - Manual (Page 28)

Getting Started 24
Your network printer is the one whose MAC address
matches the MAC address on the bottom cover of
your adapter.
Note: If you want to print to a network printer on a
remote subnet, click Add Printer and follow
the instructions on your screen.
2 Click Refresh.
3 Click Configure.
4 Enter an IP address that is valid for your network.
For help, refer to your network documentation or
contact your network administrator.
5 Click OK.
6 Continue with step 5 on page 8 (software not
previously installed) or step 7 on page 10 (software
previously installed).
Macintosh
1 From the Printer Selection screen, select the
<unconfigured> printer whose MAC/Serial Number
matches the MAC/Serial Number on the bottom cover
of your adapter.
If you want to print to a network printer on a remote
subnet, click Add Remote and follow the instructions
on your screen.
MAC address