Lexmark N1 - Manual (Page 7)

Getting Started 3
Step 3: Prepare your printer
Unpack and set up your printer. For help, refer
to the instructions that came with your printer.
To help configure your printer on the network,
– Do not connect your printer to your
computer, however, if you have already done
so, disconnect the USB or parallel cable.
– Do not install the printer software, however,
if you have already done so, you do not need
to uninstall it.
Place the printer next to your adapter.
Note: If necessary, disconnect the printer
power supply, and then reconnect it at its
new location.
Make sure the printer power light is on.
Note: Your printer may look different from the
one shown.
1
2
3
4