Lasko 4006 - Manual (Page 2)

GENERAL SAFETY INFORMATION
When using electrical appliances, basic precautions should always be followed to re-
duce the risk of fire, electrical shock and injury to persons, including the following:
SAVE THESE INSTRUCTIONS
Read all instructions before using this Fan.
1. Make certain the power source conforms to the electrical requirements of the Fan.
2. Make certain that the room is equipped with a working smoke detector.
3. Use this Fan only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electrical shock, or
injury to persons.
4. To reduce the risk of personal injury and electric shock, the Fan should not be played with or placed where small children can reach it.
5. Unplug power cord before installing, servicing, or moving the Fan.
Rev. C 9/07 2 4006ES
DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING
OR MOVING THE FAN. ALWAYS UNPLUG THE POWER CORD. ALWAYS TURN OFF AND UNPLUG FAN BEFORE
LEAVING THE AREA. NEVER LEAVE CHILDREN UNATTENDED WHEN THE FAN IS ON OR PLUGGED IN.
6. This Fan must NOT be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmospheres where
gasoline, paint or flammable liquids are used or stored.
7. DO NOT use Fan in or near a window. Rain may create an electrical hazard.
8. Completely assemble Fan, according to instructions, before connecting to power supply.
Rev. C 9/07 7
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK - DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED
CONTROL DEVICES.
9. Where possible, avoid the use of extension cords because the extension cord may overheat and cause a fire. If you must use an extension
cord, minimize the risk of overheating by using the shortest cord possible and ensuring that it is UL listed. NEVER use a single extension
cord to operate more than one Fan. DO NOT plug Fan into any other cord connected device, such as a power strip, cord reel, surge pro-
tector, mutiple outlet adapters or outlet-type air fresheners. The use of such devices may create a fire hazard.
10. NEVER operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any manner. There
are no user serviceable parts. Return Fan to an authorized service facility for examination, electrical or mechanical adjustment or repair.
11. NEVER insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire, or
damage the Fan. To reduce the risk of fire, DO NOT block or tamper with the Fan in any manner while it is in operation.
12. Always place the Fan on a stable, flat, level surface when operating, to avoid the chance of the Fan overturning. Locate the Power Cord
so the Fan or other objects are not resting on it. DO NOT run Power Cord under carpeting. DO NOT cover Power Cord with throw rugs,
runners or the like. Arrange Power Cord away from room traffic and where it will not be tripped over.
13. This Fan is not intended for use in wet or damp locations. Never locate a Fan where it may fall into a bathtub or other water container.
NEVER use Fan where flammable liquids are used or stored.
14. NEVER use Fan outdoors.
15. This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to Na-
tional Electric Code (NEC) Article 547-7 (2002), or applicable state or local codes or standards relating to electrical requirements for Agricultural
Buildings. THIS FAN DOES NOT MEET THE REQUIRMENTS OF NEC ARTICLE 547-7 (2002).
16. This Fan is not suitable for use in hazardous locations. Please refer to National Electric Code (NEC) Article 500 or applicable state or local codes
or standards relating to electrical requirements for Hazardous locations. THIS FAN DOES NOT MEET THE REQUIRMENTS OF NEC ARTICLE
500 (2002)
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock,
this plug is intended to fit in a polarized outlet only one way. Match wide blade of plug to wide slot. Fully
insert. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. DO NOT attempt to defeat this safety feature.
This plug is a safety feature, to reduce the risk of fire, electric shock and personal injury. DO NOT remove,
replace, repair or tamper with the originally supplied plug. If the Fan does not function properly, it may be due
to the safety device incorporated in this plug. Return to an authorized service center or call 800-233-0268,
Monday - Friday, between 8:00 a.m. and 5:00 p.m. EST. If the plug warning label is missing or damaged, call
the toll free number for a replacement label.
MODELO 4006
FUNCIONAMIENTO
1. Coloque el Ventilador sobre una superficie firme y nivelada
cuando use este producto como Ventilador de Escritorio. Vea las
instrucciones debajo para adosar el Sujetador Clip Stik™ a una
superficie.
ADVERTENCIA:
Los tacos de plástico o hule, tales como las
patas de esta unidad, pueden pegarse a la superficie de los muebles.
La unidad podría dejar un residuo capaz de oscurecer, manchar o
dejar marcas permanentes en el acabado de ciertas superficies
de muebles, incluyendo superficies de madera y pisos de madera
dura.
2. Conecte el cable eléctrico a un tomacorriente de 120 voltios.
Asegúrese que el enchufe encaje firmemente en el
tomacorriente.
De no encajar firmemente en los tomacorrientes,
podrían deslizarse parcial o completamente fuera del
tomacorrientes apenas con un ligero movimiento del
cable conectado. Los tomacorrientes en este estado
podrían sobrecalentarse y presentar un grave riesgo
de incendio; en caso de estar cubiertos por una cortina
o paño, el riesgo de incendio es aún mayor.
3. Gire la perilla de control en el sentido de las agujas del reloj hasta
fijar la posición de velocidad deseada:
0 - Apagado
2 - Alta Velocidad
1 - Baja Velocidad
4. Después de Apagar el Ventilador, desconecte la unidad del
tomacorriente eléctrico.
Adosando el Sujetador Clip Stik™:
1. Adose el Sujetador Clip Stik™ a una estructura plana que tenga
entre 1/4” y 1 3/4” de grosor o una barra de entre 1/2” y 1 3/4” de
diámetro. Adosar el Sujetador Clip Stik™ a estructuras con anchos
mayores o menores podría producir inestabilidad.
Pivote y Movimiento de Giro del Sujetador Clip Stik™:
(Figuras 3 y 4)
1. Para hacer pivotar el Sujetador Clip Stik™, sostenga el Accesorio
de Sujetador y haga rotar el Ventilador hasta la posición deseada.
(Figura 3)
2. Para girar el Sujetador Clip Stik™, sostenga la Bisagra de Pivote
sobre el Accesorio de Sujetador. Haga girar el Ventilador y/o
el Accesorio de Sujetador de un lado a otro hasta alcanzar la
posición deseada. (Figura 4)
El Ventilador de Escritorio Ultra Delgado con Sujetador Clip Stik™
puede ser usado como Ventilador con Sujetador Clip Stik™ o como
Ventilador de Escritorio.
Ventilador de Escritorio






ARMADO
(Figuras 1 y 2)
1. Cuidadosamente retire el Ventilador y el Accesorio de Sujetador
de la bolsa plástica y de la caja de cartón.
2. Deslice el extremo del Borde Plano del Accesorio de Sujetador
al interior de la Ranura situada en la Parte Inferior del Ventilador.
(Figura 1)
Ventilador con Sujetador
Clip Stik™
Ventilador con Sujetador Clip Stik™ Armado
Figura 2
Figura 1 Accesorio de Sujetador
Parte Inferior del Ventilador
Ranura
Sujetador
Borde Plano
4006ES


 


Figura 4
Figura 3
Accesorio de
Sujetador
Ventilador
Ventilador de Escritorio: Para usar como Ventilador de Escritorio,
no se necesita armado. Consulte la Sección de Funcionamiento.
Ventilador con Sujetador Clip Stik™: Para armar
correctamente el Ventilador con el Accesorio de Sujetador, siga
las instrucciones debajo (Figuras 1 y 2) y proceda a la Sección de
Funcionamiento.
Bisagra de
Pivote