Life Fitness OHDPR8 - Manual (Page 5)

5
STEP 2:
FIGURE 2
• LOOSELY assemble the BOTTOM UPRIGHT SUPPORT (15) to the REAR UPRIGHTS (4) using four 1/2 X 4-1/4” BOLTS (26), four
1/2” PLASITC DOME WASHERS (22), four 1/2” INT TOOTH LOCK WASHERS (20) and four1/2” LOCK NUTS (23) as shown in
FIGURE 2.
4
26 1/2 X 4-1/4”
22
4
15
20
23
Use this set of holes for
assembly with PLATFORM.
Use this set of holes for
assembly without PLATFORM.