Life Fitness Olympic Weight Tree User Manual
Page 7
Advertising
1. LOOSELY assemble the CROSS MEMBER (1) onto the FRONT FRAME (2)
and REAR FRAME (3) using four M10 X 135mm BOLTS (4), eight 3/8" SAE
WASHERS (5), and four M10 NYLOX NUTS (6) as shown.
2. LOOSELY assemble the FRONT FRAME (2) and REAR FRAME (3) using
two M10 X 25mm BOLTS (7), four 3/8" SAE WASHERS (5), and two M10
NYLOX NUTS (6) as shown.
3. Tighten all BOLTS and NUTS securely.
4. Install 1" HOLE PLUGS (8) into all open bolt holes.
Advertising