Linksys EFVCD20 User Manual
Page 10
Instant GigaCD Server
•
Enable E-Mail Notification of Problems This must be checked for
E-Mails to be sent. At least one E-Mail address must be provided.
•
E-Mail Address Enter from one to three E-Mail addresses in these
fields to which any messages will be sent.
•
Subject (optional) This text will be used as a default “Subject” line
for any E-Mail messages.
Shutdown
From here, you can shut down or reboot the Server or set a shutdown sched-
ule. After a shutdown, you must manually switch the Server back ON.
15
EtherFast Series
Copy
This information will set the default destination for CD images copied from
the Server.
•
Select Disk Select the drive you wish to use as the default
destination.
•
Cabinet Name Enter the name of the cabinet you wish to use as the
default destination. If no such cabinet exists, it will be created.
•
Image Name Enter a name here to be used as a default Image
Name. This will be used only in the event that the “Volume Name”
on the CD is blank.
•
Copy image in compressed mode Check this box to enable and
saved cd images will be compressed, if possible. However, if the cd
image is compressed, file sharing is NOT possible, because the
compressed file can not be read by other PCs.
If enabled, this will send an E-Mail in the event of a problem or error.
14