Linksys EFVCD20 - Manual (Page 9)

Instant GigaCD Server
E-Mail - For enabling E-mail messages sent to you in the event of a problem
or error.
Shutdown - For shutting down and setting a shutdown schedule.
General
This data was provided within the Setup Utility and can be adjusted here.
• Server Name You can change the name of the Server so it appears
differently on Your Network. However, if you change the Server’s
name, remember that any shortcuts to locations on the Server will no
longer work.
Punctuation and special characters (e.g. %#@) cannot be included in
the name.
• Comment This optional field allows you to enter a comment, such
as the physical location of the Instant GigaCD Server, if you wish.
• Current Date /Current Time The Server’s calendar will be set
according to the information put into these fields.
• Time Zone Find and select your correct Time Zone in this drop
down menu.
13
EtherFast Series
Once the Server has been properly installed and setup using the Setup
Manager, the Instant GigaCD Server can be managed using the Configuration
menu in the Management Utility.
You can set a password to restrict access to the Instant GigaCD Server, pro-
tecting the configuration data from unauthorized changes. It is recommended
that you set a password.
• Old Password If a password has already been set, it must be entered
into this field. Leave this field blank if no password has been set.
• New Password Enter the new password here.
• Confirm Password Re-enter the new password here.
The System heading includes the following tabs:
General - For selecting the name which the Instant GigaCD Server will have
in your network. From here, you can also set the date and time.
Copy - For setting the default location of saved CD images in your network.
12
Password
System